NSN 5340-01-153-1283 · NIIN 011531283 · FSC 5340
NO DASHES 5340011531283
In Stock
MOUNT,RESILIENT,UTILITY
Hardware, Commercial
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AARX | INSIDE DIAMETER | INCHES MINIMUM 0.165 AND INCHES MAXIMUM 0.168 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.145 AND INCHES MAXIMUM 0.175 |
| AFQM | DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES MINIMUM 1.464 AND INCHES MAXIMUM 1.474 |
| AFQN | FLANGE LENGTH | INCHES NOMINAL 1.875 |
| AGFF | FLANGE WIDTH | INCHES NOMINAL 1.250 |
| ASZD | LOAD RATING | POUNDS MAXIMUM 9.0 |
| BXCD | DISTANCE FROM FLANGE TO END | INCHES NOMINAL 0.450 |
| FEAT | SPECIAL FEATURES | HOLES SLOTTED 0.118-0.123 IN. BY 0.215 IN.; MATCHED SET,4 ISOLATORS,SET SHALL BE FABRICATED USING SAME ELASTOMER LOT; INERTIAL PLATFORM ASSEMBLY,MX-9923/A |
| HGTH | HEIGHT | INCHES NOMINAL 1.030 |
| MATT | MATERIAL | MOUNTING FLANGE PLATE ALUMINUM ALLOY |
| MATT | MATERIAL | BOLT STEEL CORROSION RESISTING OR ALUMINUM ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BOLT FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 6, ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MOUNTING FLANGE PLATE FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 4, ALLOY 2024 |
| SFTT | SURFACE TREATMENT | MOUNTING FLANGE PLATE CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MOUNTING FLANGE PLATE MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-5541 |
| STYL | STYLE DESIGNATOR |