NSN 4720-01-428-6934 · NIIN 014286934 · FSC 4720
NO DASHES 4720014286934
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Application: 2320-01-354-3382; AN/ALQ-147(V) COUNTERMEASURE SET
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 2B |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.375 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -50.0 AND FAHRENHEIT 200.0 |
| ABKV | OUTSIDE DIAMETER | INCHES MAXIMUM 0.625 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 3.500 |
| AGAV | END ITEM IDENTIFICATION | 2320-01-354-3382; AN/ALQ-147(V) COUNTERMEASURE SET |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS COMPLETE FITTING STEEL |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | FIRST END COMPLETE FITTING ZINC |
| AWLS | CONNECTION TYPE | SECOND END THREADED INTERNAL TUBE |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CQBD | BURST TEST PRESSURE | OVERALL POUNDS PER SQUARE INCH 900.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.625 |
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 0.625 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 150.0 |
| CQRB | SEAT ANGLE | SECOND END DEGREES 45.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 45.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 300.0 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND OZONE RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | MILLIMETERS NOMINAL OVERALL 3048.0 |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE FUEL/OIL, HYDROCARBON |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED FABRIC OR SPIRALLY WRAPPED FABRIC OR WOVEN FABRIC |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNF |
| THSD | THREAD SERIES DESIGNATOR | SECOND END UNF |