NSN 2540-01-676-2340 · NIIN 016762340 · FSC 2540
NO DASHES 2540016762340
In Stock
MOTOR,HYDRAULIC
Vehicular Furniture and Accessories
Application: 2350-01-619-5649;TANK,COMBAT,FULL TRACKED
Technical characteristics
38 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ASMM | CONNECTION QUANTITY | 1 |
| AEQC | OPERATING SPEED AT RATED CAPACITY IN RPM | 5800.0 |
| ABKG | BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.41 |
| AXFC | CONNECTION DESIGN | THREADED |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 1.125 |
| AXFP | DISPLACEMENT TYPE | VARIABLE |
| ASAP | SPLINE PITCH | 32/64 |
| AXFH | SPLINE LENGTH | INCHES NOMINAL 0.50 |
| AWLS | CONNECTION TYPE | INLET |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUH | SPLINE MINOR DIAMETER | INCHES NOMINAL 0.50 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES NOMINAL 0.62 |
| AAXX | MOUNTING TYPE | STANDARD |
| AZFF | BOLT HOLE SPACING | 1IN ON SIDE AND 1.625 ON TOP |
| CQJB | PROOF PRESSURE | DISCHARGE POUNDS PER SQUARE INCH GAGE 125.0 |
| CQJB | PROOF PRESSURE | INLET POUNDS PER SQUARE INCH GAGE 2625.0 |
| CQQF | OPERATING PRESSURE | DISCHARGE POUNDS PER SQUARE INCH GAGE (PSIG) MAXIMUM 90.0 |
| CQQF | OPERATING PRESSURE | INLET POUNDS PER SQUARE INCH GAGE (PSIG) MAXIMUM 1650.0 |
| CSWK | BURST PRESSURE | DISCHARGE PRESSURE POUNDS PER SQUARE INCH GAGE 250.0 |
| CSWK | BURST PRESSURE | INLET PRESSURE POUNDS PER SQUARE INCH GAGE 4000.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | MOTOR,HYDRAULIC,FAN |
| CYHY | VEHICLE IDENTIFICATION DESIGNATOR | M1A2 |
| MATT | MATERIAL | HOUSING ALUMINUM ALLOY |
| MEDA | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID |
| SFTT | SURFACE TREATMENT | HOUSING PAINT |
| AXFQ | CONSTANT DISPLACEMENT PER REVOLUTION | CUBIC INCHES 0.158 |
| AXFB | MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 90 PSIG AT 250F |
| AMPZ | TEMP RANGE | DEG FAHRENHEIT -25.0 TO 250.0 |
| APJC | THREAD LOCATION | OVERALL INTERNAL |
| ABSA | SPLINE QUANTITY | 1 |
| AECS | BOLT HOLE QUANTITY | 4 |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 45.0 |
| AGAV | END ITEM IDENTIFICATION | 2350-01-619-5649;TANK,COMBAT,FULL TRACKED |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.547 |
| AJAB | DRIVE SHAFT TYPE | SPLINED, INVOLUTE EXTERNAL |
| ABUJ | THREAD SIZE | 10 |