NSN 5340-01-407-7714 · NIIN 014077714 · FSC 5340
NO DASHES 5340014077714
In Stock
BRACKET,DOUBLE ANGLE
Hardware, Commercial
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.410 AND INCHES MAXIMUM 0.414 |
| ADLK | FIRST LEG LENGTH | INCHES NOMINAL 0.500 |
| ADLL | SECOND LEG LENGTH | INCHES NOMINAL 0.500 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.410 AND INCHES MAXIMUM 0.414 |
| AHPW | FIRST LEG THICKNESS | INCHES NOMINAL 0.119 |
| AHPX | SECOND LEG THICKNESS | INCHES NOMINAL 0.119 |
| AHPZ | CENTER SECTION HEIGHT | INCHES NOMINAL 1.500 |
| AHQA | CENTER SECTION WIDTH | INCHES NOMINAL 0.119 |
| AHQB | CENTER SECTION THICKNESS | INCHES NOMINAL 0.119 |
| AHQN | FIRST LEG WIDTH | INCHES NOMINAL 4.380 |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 0.690 |
| AHQX | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | INCHES NOMINAL 0.360 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 2.500 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 1.060 |
| AJZU | FIRST LEG STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| CSSR | SECOND LEG ANGLE | DEGREES NOMINAL 90.0 |
| FEAT | SPECIAL FEATURES | INSTALL TWO STRUX NUTS;P/N 12339294-4 |
| MATT | MATERIAL | STEEL COMP 1009 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE AST- A569 |
| STYL | STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIIN 014116419. An older drawing citing one of those numbers resolves here.