NSN 4720-00-889-1723 · NIIN 008891723 · FSC 4720
NO DASHES 4720008891723
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-PLASTIC, POLYTETRAFLUOROETHYLENE; HOSE COVERED W/CHAFING GUARD |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.313 |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNF |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | FIRST END COMPLETE FITTING PASSIVATE |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 10.700 |
| CRSM | VACUUM IN TORR | 50.8 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.188 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 450.0 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | CLASS 1 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 3000.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT |
| AHNC | CONNECTION STYLE | |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKXL | END FITTING COMPONENT AND MATERIAL | ALL ENDS COMPLETE FITTING STEEL CORROSION RESISTING |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 1500.0 |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 12000.0 |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE AIR AND ALCOHOL, ETHYL AND ALCOHOL, METHYL AND FUEL/OIL, HYDROCARBON AND WATER, FRESH AND WATER, SALT |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3B |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| ADJS | EXTERIOR COLOR | NATURAL |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.438 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 2.000 |
Supersedes
This item replaces cancelled NIIN 000713218. An older drawing citing one of those numbers resolves here.