NSN 3020-00-823-6022 · NIIN 008236022 · FSC 3020
NO DASHES 3020008236022
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 32.306 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 1.250 |
| CWNH | TOOTH FORM | STANDARD |
| MATT | MATERIAL | OVERALL STEEL COMP 8620 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 AND ASSN STD SINGLE MATERIAL RESPONSE AISI TO SAE 8620 |
| STYL | STYLE DESIGNATOR | |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.880 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.044 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 50.0 AND ROCKWELL C MAXIMUM 61.0 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.0000 |
| FEAT | SPECIAL FEATURES | SHIFTER SLEEVE ON HUB END |
| ANTP | BORE STYLE | |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 1.0000 |
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 22 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.213 |
| AJLA | TEETH QUANTITY | 11 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
Supersedes
This item replaces cancelled NIINs 008438260 · 009486064. An older drawing citing one of those numbers resolves here.