NSN 3020-00-383-9815 · NIIN 003839815 · FSC 3020
NO DASHES 3020003839815
In Stock
GEAR,BEVEL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.7500 |
| FEAT | SPECIAL FEATURES | 1ST END RECESSED 0.3328 IN. DEEP |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 58.0 AND ROCKWELL C MAXIMUM 63.0 |
| AAQL | BODY STYLE | |
| CBBL | FEATURES PROVIDED | STRAIGHT TEETH |
| MATT | MATERIAL | OVERALL STEEL COMP 8620 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66,AISI TO SAE 8620 |
| STYL | STYLE DESIGNATOR | |
| CWPP | PRESSURE ANGLE | DEGREES 22.5000 |
| CWQD | PITCH ANGLE | DEGREES 34.5000 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.1875 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.0035 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 3.0800 |
| AJLA | TEETH QUANTITY | 11 |
| ANTP | BORE STYLE | |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 1.3725 |
Supersedes
This item replaces cancelled NIIN 003426629. An older drawing citing one of those numbers resolves here.