NSN 3130-01-295-5291 · NIIN 012955291 · FSC 3130
NO DASHES 3130012955291
In Stock
BEARING UNIT,BALL
Bearings, Mounted
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.688 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.625 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 2.4375 |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 2.094 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 7.375 |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | INCHES NOMINAL 2.750 |
| AKRF | SEAL TYPE | CONTACT AND LABYRINTH |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 90.0 |
| CWGY | ROTATING ELEMENT LOCKING METHOD | DIRECT |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| CXCX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG SIDE OF A SQUARE | INCHES NOMINAL 5.875 |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | BEARING STEEL |
| MATT | MATERIAL | HOUSING IRON |
| MATT | MATERIAL | SEAL PLASTIC POLYAMIDE NYLON |
| STYL | STYLE DESIGNATOR |