NSN 2920-00-737-4750 · NIIN 007374750 · FSC 2920
NO DASHES 2920007374750
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| ELEC | VOLTAGE IN VOLTS | 24.0 |
| BZRR | THREAD SERIES | UNF |
| ABRR | KEYWAY WIDTH | INCHES NOMINAL 0.125 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 16 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CFHL | THREAD CLASS | 2A |
| ADER | MOUNTING STYLE | |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FUNGUS RESISTANT |
| AFYS | KEYWAY LENGTH | INCHES NOMINAL 0.625 |
| AHZV | SUBMERSIBILITY | SUBMERSIBLE |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | INCHES NOMINAL 1.391 |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.500 |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1750 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 25.0 |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | INCHES NOMINAL 3.875 |
| ABVA | UNTHREADED PORTION LENGTH | INCHES NOMINAL 1.234 |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 159.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 201.0 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | INCHES NOMINAL 7.250 |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | INCHES NOMINAL 8.125 |
| CMLL | MOUNTING HOLE THREAD DIAMETER | INCHES NOMINAL 0.375 |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 8000 |
| BCGN | GROUNDING METHOD | INTERNAL |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.797 |
| ABFF | FURNISHED ITEMS | RADIO INTERFERENCE SHIELDING |
| ABPT | SECOND STEP DIAMETER | INCHES NOMINAL 0.669 |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES NOMINAL 3.875 |
| BCGS | SHAFT DRIVE END STYLE | |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.453 |
| BCGG | MINIMUM CURRENT CUT-IN SPEED IN RPM | 1500 |