NSN 5315-00-752-4316 · NIIN 007524316 · FSC 5315
NO DASHES 5315007524316
In Stock
PIN,GROOVED,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STYL | STYLE DESIGNATOR | |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| CRDY | FIRST END LOCATION | BOTH ENDS |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| FEAT | SPECIAL FEATURES | 0.125 IN. W BY 0.062 IN. DEEP GROOVE AROUND CENTER ON OD,0.250-24 UNS TAPPED HOLE IN ON END |
| AMCS | FIRST END TAPER LENGTH | INCHES MINIMUM 0.016 AND INCHES MAXIMUM 0.047 |
| ABPD | SECOND UNDERCUT WIDTH | INCHES MINIMUM 0.109 AND INCHES MAXIMUM 0.141 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 1 |
| AAGZ | FIRST END STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.547 AND INCHES MAXIMUM 1.578 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.495 AND INCHES MAXIMUM 0.497 |
| ABNZ | EFFECTIVE LENGTH | INCHES NOMINAL 1.312 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.472 AND INCHES MAXIMUM 0.476 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.039 AND INCHES MAXIMUM 0.042 |
| ABRC | FIRST HOLE DIAMETER | INCHES MINIMUM 0.109 AND INCHES MAXIMUM 0.141 |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 OR STEEL COMP 8640 OR STEEL COMP 8740 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD ALL MATERIAL RESPONSES AST- A304 |
| ABRB | HOLE ARRANGEMENT STYLE |
Supersedes
This item replaces cancelled NIIN 008308824. An older drawing citing one of those numbers resolves here.