NSN 5306-01-556-4953 · NIIN 015564953 · FSC 5306
NO DASHES 5306015564953
In Stock
BOLT,MACHINE
Bolts
Application: MRAP - COMMON NSN - USED ON 4 MRAP VARIANTS AND 1 OTHER WEAPON SYSTEM; MRAP - MAXXPRO DASH ISS W/OGPK AND W/CROWS
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AATD | EXTENDED WASHER THICKNESS | MILLIMETERS MINIMUM 2.4 |
| THSD | THREAD SERIES DESIGNATOR | M |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASK | HEAD STYLE | |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, M18 X 100MM LONG |
| AASA | THREAD LENGTH | MILLIMETERS MINIMUM 42.0 |
| AASB | FASTENER LENGTH | MILLIMETERS NOMINAL 100.0 |
| AATC | EXTENDED WASHER DIAMETER | MILLIMETERS MAXIMUM 35.0 |
| AASU | HEAD HEIGHT | MILLIMETERS MAXIMUM 14.1 |
| AAJD | THREAD CLASS | 6G |
| SFTT | SURFACE TREATMENT | OVERALL PHOSPHATE |
| CQQR | THREAD PITCH IN MILLIMETERS | 2.5 |
| AATB | WIDTH BETWEEN FLATS | MILLIMETERS MINIMUM 23.16 AND MILLIMETERS MAXIMUM 24.00 |
| MATT | MATERIAL | OVERALL STEEL PROPERTY CLASS 10.9 |
| AHYM | NOMINAL THREAD DIAMETER | MILLIMETERS 18.0 |
| AGAV | END ITEM IDENTIFICATION | MRAP - COMMON NSN - USED ON 4 MRAP VARIANTS AND 1 OTHER WEAPON SYSTEM; MRAP - MAXXPRO DASH ISS W/OGPK AND W/CROWS |
Supersedes
This item replaces cancelled NIIN 015362406. An older drawing citing one of those numbers resolves here.