NSN 5905-00-617-9763 · NIIN 006179763 · FSC 5905
NO DASHES 5905006179763
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0930 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ABPM | BODY DIAMETER | INCHES NOMINAL 1.438 |
| AEDX | SHAFT STYLE | |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 2.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1ST SECTION 1 AND 2ND SECTION 1 AND 3RD SECTION 1 AND 4TH SECTION 1 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | 1ST SECTION -1.0 TO 1.0 AND 2ND SECTION -1.0 TO 1.0 AND 3RD SECTION -1.0 TO 1.0 AND 4TH SECTION -1.0 TO 1.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 1ST SECTION 24365.0 AND 2ND SECTION 4875.0 AND 3RD SECTION 4875.0 AND 4TH SECTION 4875.0 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 16 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | ALL SECTIONS -0.15 TO 0.15 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 1.453 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 1.438 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.688 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 2.617 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS 1ST SECTION 48.730 AND KILOHMS 2ND SECTION 9.750 AND KILOHMS 3RD SECTION 9.750 AND KILOHMS 4TH SECTION 9.750 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 1.80 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 1.30 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 1.3120 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0620 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 1.2500 |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.0730 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 3.305 |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AAPN | SECTION QUANTITY | 4 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 354.0 |
Supersedes
This item replaces cancelled NIIN 009022784. An older drawing citing one of those numbers resolves here.