NSN 5905-00-651-1640 · NIIN 006511640 · FSC 5905
NO DASHES 5905006511640
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 3.40 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 2.40 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS 1ST SECTION 9.750 AND KILOHMS 2ND SECTION 9.750 AND KILOHMS 3RD SECTION 9.750 AND KILOHMS 4TH SECTION 9.750 AND KILOHMS 5TH SECTION 39.000 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 349.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | ALL SECTIONS -0.65 TO 0.65 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 345.0 |
| AAPN | SECTION QUANTITY | 5 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 1.3115 AND INCHES MAXIMUM 1.3120 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 3.879 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 1.312 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0930 |
| AEDX | SHAFT STYLE | |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 15 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 1.706 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.249 AND INCHES MAXIMUM 0.250 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 1.4380 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 2.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | 1ST SECTION -5.0 TO 5.0 AND 2ND SECTION -5.0 TO 5.0 AND 3RD SECTION -5.0 TO 5.0 AND 4TH SECTION -5.0 TO 5.0 AND 5TH SECTION -5.0 TO 5.0 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0730 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 1.453 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 3.160 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.657 AND INCHES MAXIMUM 0.719 |