NSN 6105-00-349-6896 · NIIN 003496896 · FSC 6105
NO DASHES 6105003496896
In Stock
MOTOR,CONTROL
Motors, Electrical
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABXQ | FLATTED PORTION LENGTH | SECOND END INCHES NOMINAL 0.7500 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.112 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 5 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| CWHZ | SHAFT END CHARACTERISTIC | FIRST END FIRST STYLE A2 AND SECOND STYLE A4 AND THIRD STYLE A28 |
| CWHZ | SHAFT END CHARACTERISTIC | SECOND END SINGLE STYLE A5 |
| AASA | THREAD LENGTH | FIRST END INCHES NOMINAL 0.120 |
| ABND | TAPER LENGTH | FIRST END INCHES MINIMUM 0.179 AND INCHES MAXIMUM 0.189 |
| AAJV | OVERALL WIDTH | INCHES 2.375 |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| ABWV | SHAFT DIAMETER | SECOND END INCHES NOMINAL 0.156 |
| ACDC | CURRENT TYPE | INPUT AC |
| AGQL | UNDERCUT LENGTH | FIRST END INCHES NOMINAL 0.030 |
| AGRB | FLAT DEPTH | SECOND END INCHES MINIMUM 0.016 AND INCHES MAXIMUM 0.017 |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AXGY | MOUNTING METHOD | PAD |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| BFML | CONTROL FIELD WINDING TYPE | SINGLE WINDING W/CENTER TAP |
| BFNF | UNDERCUT CENTER TO SHAFT END DISTANCE | FIRST END INCHES MINIMUM 0.130 AND INCHES MAXIMUM 0.140 |
| BKPH | TORQUE RATING AND TYPE | INCH-OUNCES STALLED 5.0 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SECOND END INCHES 1.062 |
| CWDY | TEMP RATING | AMBIENT CELSIUS -29.0 AND AMBIENT CELSIUS 65.0 |
| FAAZ | PHASE | INPUT TWO |
| BFMF | COOLING METHOD | NATURAL CONVECTION VENTILATED |
| BFMK | CONTROL FIELD IMPEDANCE RATING IN OHMS | 4900.0 AND 5100.0 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | FIRST END INCHES 0.375 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 1.920 |
| CWGD | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES 1.500 |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| BKPS | CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS | AC 300.0 |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNF |
| AAJT | OVERALL HEIGHT | INCHES 2.875 |
| AAJU | OVERALL LENGTH | INCHES 4.562 |
| ABWV | SHAFT DIAMETER | FIRST END INCHES NOMINAL 0.112 |
| FEAT | SPECIAL FEATURES | SHAFT END SECOND STYLE 0.157 IN. DIA; SHAFT END THIRD STYLE 0.112 IN. DIA |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE NO LOAD 3300.0 |
| ABPA | UNDERCUT DIAMETER | FIRST END INCHES NOMINAL 0.075 |
| CQRR | TAPER | FIRST END PER FOOT IN INCHES 8.000 |
Supersedes
This item replaces cancelled NIINs 000237762 · 000863513 · 003402876 · 005191789 · 005074741 · 009705087. An older drawing citing one of those numbers resolves here.