NSN 5305-00-298-1107 · NIIN 002981107 · FSC 5305
NO DASHES 5305002981107
In Stock
SCREW,SHOULDER
Screws
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AATN | SHOULDER DIAMETER | FIRST SHOULDER INCHES MINIMUM 0.523 AND INCHES MAXIMUM 0.624 |
| AASK | HEAD STYLE | |
| FEAT | SPECIAL FEATURES | CONCENTRIC HOLE ALONG THE LONGITUDINAL CENTER LINE OF BOLT,0.181 IN. MIN,0.187 IN. MAX DIA BY 1.770 IN. DEEP |
| MATT | MATERIAL | OVERALL STEEL COMP 4130 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AAJD | THREAD CLASS | 3A |
| AATX | SHOULDER LENGTH | FIRST SHOULDER INCHES NOMINAL 2.210 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.450 AND INCHES MAXIMUM 0.480 |
| AASL | HEAD DIAMETER | INCHES NOMINAL 1.080 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.108 AND INCHES MAXIMUM 0.113 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.189 AND INCHES MAXIMUM 0.193 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 180000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 0.100 AND INCHES MAXIMUM 0.130 |
| CWYB | SHOULDER SHAPE | FIRST SHOULDER ROUND |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.850 AND INCHES MAXIMUM 2.880 |