NSN 3416-01-245-8383 · NIIN 012458383 · FSC 3416
NO DASHES 3416012458383
In Stock
LATHE,ENGINE
Lathes
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAXX | MOUNTING TYPE | FLOOR |
| ACDC | CURRENT TYPE | AC |
| ADQR | CENTER TO CENTER DISTANCE | INCHES NOMINAL 30.000 |
| AGLD | PERFORMANCE TYPE | STANDARD DUTY |
| AKSL | PURPOSE FOR WHICH DESIGNED | TOOLROOM |
| APGF | DESIGN TYPE | SCREW |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 7.500 |
| AWLX | ELECTRIC MOTOR QUANTITY | 2 |
| BTSZ | SPINDLE SPEED QUANTITY | 12 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 45.0 TO 1800.0 |
| BTTD | RATED SWING | INCHES NOMINAL 15.500 |
| BTTG | SWING OVER CROSS SLIDE | INCHES NOMINAL 9.500 |
| BTWB | THREAD CHANGE QUANTITY | 48 |
| BTWL | HEADSTOCK DRIVE TYPE | GEARED HEAD OR STEP CONE PULLEY, BACK GEARED |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | INCHES NOMINAL 4.125 |
| BTYQ | CARRIAGE QUANTITY | 1 |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| BTYT | CARRIAGE FEED CHANGE QUANTITY | 48 |
| BTZR | THREAD QUANTITY RANGE | PER INCH 2.0 TO 112.0 |
| ELEC | VOLTAGE IN VOLTS | 110.0 AND 220.0 |
| FAAZ | PHASE | SINGLE/THREE |
| FEAT | SPECIAL FEATURES | 0.250 HORSEPOWER COOLANT MOTOR; CHIP AND COOLANT SHIELD; CHIP PAN; SET OF LEVELING PLATES; TANG DRIVER IN TAILSTOCK SPINDLE; SERVO-SHIFT HEADSTOCK; ELECTRIC BRAKE AND POWER UNIT; TAPERED SPINDLE SLEEVE CENTERS; HARDENED AND GROUND, REPLACEABLE STEEL BEDWAYS; DUAL INCH/METRIC DIALS FOR CROSSFEED; DUAL GRADUATED INCH/METRIC DIAL FOR COMPOUND; CHASING DIAL |
| FREQ | FREQUENCY IN HERTZ | 60.0 |