NSN 2520-00-495-7706 · NIIN 004957706 · FSC 2520
NO DASHES 2520004957706
In Stock
SHAFT,AXLE,AUTOMOTIVE
Vehicular Power Transmission Components
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 2.9062 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 30.688 |
| AETC | METALLIC HARDNESS RATING | MINIMUM ROCKWELL C 35.0 AND MAXIMUM ROCKWELL C 45.0 |
| AGGP | DRILLED HOLE DIAMETER | INCHES MINIMUM 0.982 AND INCHES MAXIMUM 0.985 |
| BNTX | END HOLE TYPE | DRILLED |
| BNTS | SECOND END FACILITY LOCATION | 2.413 IN. FROM SHAFT END |
| AMGF | SECOND END PITCH DIAMETER | INCHES NOMINAL 1.879 |
| AMQA | FIRST END TYPE | SPLINED |
| AAZQ | HOLE DEPTH | INCHES NOMINAL 0.531 |
| AMDM | FIRST END SPLINE LENGTH | INCHES NOMINAL 2.750 |
| BBCD | FIRST END SPLINE QUANTITY | 16 |
| BNPK | SECOND END FACILITY DIAMETER | INCHES MINIMUM 1.655 AND INCHES MAXIMUM 1.655 |
| BNTC | FIRST END FACILITY WIDTH | INCHES MINIMUM 0.151 |
| BNTM | SECOND END SPLINE TYPE | INVOLUTE |
| BNTN | SECOND END SPLINE PRESSURE ANGLE IN DEG | 29.0 |
| BNTR | SECOND END FACILITY WIDTH | INCHES MAXIMUM 0.154 |
| AMDN | FIRST END SPLINE MINOR DIAMETER | INCHES MINIMUM 1.600 AND INCHES MAXIMUM 1.608 |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | INCHES MINIMUM 1.859 AND INCHES MAXIMUM 1.861 |
| BBCF | SECOND END SPLINE QUANTITY | 12 |
| BNYX | FIRST END SPLINE TYPE | STRAIGHT |
| MATT | MATERIAL | STEEL |
| ASXK | HOLE QUANTITY | 1 |
| AMQF | SECOND END TYPE | SPLINED |