NSN 5305-00-207-1728 · NIIN 002071728 · FSC 5305
NO DASHES 5305002071728
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.460 AND INCHES MAXIMUM 1.500 |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.000 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAJD | THREAD CLASS | 3A |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.244 AND INCHES MAXIMUM 0.250 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.187 AND INCHES MAXIMUM 0.189 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL B MINIMUM 80.0 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 30000 |
| MATT | MATERIAL | OVERALL STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 OR STEEL COMP XM-7 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD 1ST MATERIAL RESPONSE 66 OR FED STD 2ND MATERIAL RESPONSE 66 OR FED STD 3RD MATERIAL RESPONSE 66 OR FED STD 4TH MATERIAL RESPONSE 66 OR FED STD 5TH MATERIAL RESPONSE 66 OR ASSN STD 6TH MATERIAL RESPONSE AST- A493 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 1 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.367 AND INCHES MAXIMUM 0.375 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AASK | HEAD STYLE |
Supersedes
This item replaces cancelled NIIN 002740757. An older drawing citing one of those numbers resolves here.