NSN 5305-00-273-4956 · NIIN 002734956 · FSC 5305
NO DASHES 5305002734956
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABQZ | INTERNAL DRIVE STYLE | |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 38.0 AND ROCKWELL C MAXIMUM 45.0 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 170000 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.2500 AND INCHES MAXIMUM 0.2530 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.734 AND INCHES MAXIMUM 0.875 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.044 AND INCHES MAXIMUM 0.050 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY 2 CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 6 |
| CRHC | HOLE CONFIGURATION STYLE | |
| MATT | MATERIAL | OVERALL STEEL |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 150000 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.306 AND INCHES MAXIMUM 0.312 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.457 AND INCHES MAXIMUM 0.469 |
| ASXK | HOLE QUANTITY | 6 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.845 AND INCHES MAXIMUM 0.875 |
| AASK | HEAD STYLE |
Supersedes
This item replaces cancelled NIIN 006467773. An older drawing citing one of those numbers resolves here.