NSN 5305-00-543-5800 · NIIN 005435800 · FSC 5305
NO DASHES 5305005435800
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.312 AND INCHES MAXIMUM 0.316 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CRHC | HOLE CONFIGURATION STYLE | |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC ALL TREATMENT RESPONSES QQ--416,TY 2,CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| ABQZ | INTERNAL DRIVE STYLE | |
| ASXK | HOLE QUANTITY | 6 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 170000 |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.460 AND INCHES MAXIMUM 1.810 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.460 AND INCHES MAXIMUM 2.500 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.550 AND INCHES MAXIMUM 0.562 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.368 AND INCHES MAXIMUM 0.375 |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.064 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 38.0 AND ROCKWELL C MAXIMUM 45.0 |
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 150000 |
Supersedes
This item replaces cancelled NIIN 006376848. An older drawing citing one of those numbers resolves here.