NSN 5310-00-274-9337 · NIIN 002749337 · FSC 5310
NO DASHES 5310002749337
In Stock
NUT,PLAIN,WING
Nuts and Washers
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BZRR | THREAD SERIES | UNIFIED NATIONAL COARSE (UNC) |
| ALET | HOLE TYPE AND QUANTITY | DRILLED 1 |
| CMLP | THREAD QUANTITY PER INCH | 13 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE A AND STYLE 2 |
| MATT | MATERIAL | OVERALL COPPER ALLOY 268 OR COPPER ALLOY 260 OR COPPER ALLOY 240 OR COPPER ALLOY 230 OR COPPER ALLOY 342 OR COPPER ALLOY 353 OR COPPER ALLOY 262 OR COPPER ALLOY 270 OR COPPER ALLOY 272 OR COPPER ALLOY 274 OR COPPER ALLOY 280 OR COPPER ALLOY 330 OR COPPER ALLOY 331 OR COPPER ALLOY 332 OR COPPER ALLOY 335 OR COPPER ALLOY 340 OR COPPER ALLOY 344 OR COPPER ALLOY 345 OR COPPER ALLOY 347 OR COPPER ALLOY 348 OR COPPER ALLOY 350 OR COPPER ALLOY 356 OR COPPER ALLOY 360 OR COPPER ALLOY 370 OR COPPER ALLOY 377 OR COPPER ALLOY 462 OR COPPER ALLOY 464 OR COPPER ALLOY 465 OR COPPER ALLOY 466 OR COPPER ALLOY 467 OR COPPER ALLOY 482 OR COPPER ALLOY 485 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC ALL MATERIAL RESPONSES QQ-B-626 OR FED SPEC ALL MATERIAL RESPONSES QQ-B-613 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.500 |
| CRHC | HOLE CONFIGURATION STYLE | |
| AARN | FABRICATION METHOD | FORGED |
| AAXF | WING SPREAD WIDTH | INCHES MINIMUM 1.810 AND INCHES MAXIMUM 1.940 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 0.870 AND INCHES MAXIMUM 1.000 |
| AAJD | THREAD CLASS | 2B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ACTA | NUT STYLE | |
| AGGP | DRILLED HOLE DIAMETER | INCHES NOMINAL 0.070 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 0.860 AND INCHES MAXIMUM 0.930 |
| FEAT | SPECIAL FEATURES | COPPER ALLOYS 377,462,464,465,466,467,482,AND 485 NOT COVERED BY QQ-B-613 |
Supersedes
This item replaces cancelled NIIN 005793912. An older drawing citing one of those numbers resolves here.