NSN 4720-00-614-2506 · NIIN 006142506 · FSC 4720
NO DASHES 4720006142506
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 11.500 |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 12000.0 |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.310 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.563 |
| AWLS | CONNECTION TYPE | SECOND END THREADED INTERNAL TUBE |
| CQRB | SEAT ANGLE | SECOND END DEGREES 37.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 6000.0 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 45.0 |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 3B |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNIFIED NATIONAL JOINT FINE (UNJF) |
| THSD | THREAD SERIES DESIGNATOR | SECOND END UNIFIED NATIONAL JOINT FINE (UNJF) |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.450 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 4.000 |
| AHNC | CONNECTION STYLE | |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 0.563 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 3000.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 450.0 |
Supersedes
This item replaces cancelled NIIN 005487342. An older drawing citing one of those numbers resolves here.