NSN 6105-01-116-9268 · NIIN 011169268 · FSC 6105
NO DASHES 6105011169268
In Stock
MOTOR,DIRECT CURRENT
Motors, Electrical
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | SINGLE END RIGHT-HAND |
| AAJT | OVERALL HEIGHT | INCHES 29.000 |
| AAJU | OVERALL LENGTH | INCHES 37.750 |
| AAJV | OVERALL WIDTH | INCHES 28.375 |
| AASA | THREAD LENGTH | SINGLE END INCHES NOMINAL 0.4380 |
| ABND | TAPER LENGTH | SINGLE END INCHES NOMINAL 1.3750 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES NOMINAL 0.3750 |
| ABRV | KEYWAY DEPTH | SINGLE END INCHES NOMINAL 0.1880 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES MINIMUM 0.997 AND INCHES MAXIMUM 1.000 |
| AFYS | KEYWAY LENGTH | SINGLE END INCHES NOMINAL 1.3750 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | DRIPPROOF PROTECTED-45 DEG |
| AXCP | WINDING TYPE | SHUNT WOUND |
| AXGY | MOUNTING METHOD | FACE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 8 |
| BFMF | COOLING METHOD | SELF-VENTILATED |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | NEMA |
| CBBL | FEATURES PROVIDED | FRAME ELECTRICALLY GROUNDED AND HORIZONTAL MOUNTING POSITION |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CNMM | FRAME SIZE DESIGNATION | 444VY |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 30.0000 |
| CQJX | NOMINAL THREAD SIZE | SINGLE END INCHES 1.000 |
| CQRR | TAPER | SINGLE END PER FOOT IN INCHES 75.000 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 2.312 |
| CWDY | TEMP RATING | OPERATING CELSIUS 50.0 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 16.000 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 1150.0 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 100.000 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 250.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END FIRST STYLE A2 AND SECOND STYLE A29 AND THIRD STYLE A1 |
| FEAT | SPECIAL FEATURES | SHAFT SECOND DIA 1.624 IN. MIN;1.625 IN. MAX |
| THSD | THREAD SERIES DESIGNATOR | SINGLE END UN |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDERLESS LUG 4 AND WIRE LEAD 4 |
Supersedes
This item replaces cancelled NIIN 011174533. An older drawing citing one of those numbers resolves here.