NSN 5962-01-103-6337 · NIIN 011036337 · FSC 5962
NO DASHES 5962011036337
In Stock
MICROCIRCUIT,LINEAR
Microcircuits, Electronic
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAR | BODY OUTSIDE DIAMETER | INCHES MINIMUM 0.209 AND INCHES MAXIMUM 0.230 |
| ADAU | BODY HEIGHT | INCHES NOMINAL 0.090 |
| AEHX | MAXIMUM POWER DISSIPATION RATING | MILLIWATTS 250.0 |
| AFGA | OPERATING TEMP RANGE | CELSIUS -55.0 TO 125.0 |
| AFJQ | STORAGE TEMP RANGE | CELSIUS -65.0 TO 150.0 |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND NEGATIVE OUTPUTS AND POSITIVE OUTPUTS |
| CQSJ | INCLOSURE MATERIAL | METAL |
| CQSZ | INCLOSURE CONFIGURATION | CAN |
| CQZP | INPUT CIRCUIT PATTERN | 1 INPUT |
| CSSL | DESIGN FUNCTION AND QUANTITY | REGULATOR, VOLTAGE 1 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | VOLTS MAXIMUM POWER SOURCE 2.2 |
| FEAT | SPECIAL FEATURES | PIN 2 CONNECTED TO CASE |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 14933-77028 |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 2 |
Supersedes
This item replaces cancelled NIIN 012633996. An older drawing citing one of those numbers resolves here.