NSN 3110-01-209-8129 · NIIN 012098129 · FSC 3110
NO DASHES 3110012098129
In Stock
BEARING,BALL,DUPLEX
Bearings, Antifriction, Unmounted
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.5000 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 1.3125 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES NOMINAL 1.7500 |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGZC | LOAD DIRECTION | ANGULAR |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO. 7T |
| CTHQ | BEARING PRELOAD RATING | POUNDS MINIMUM 30.0 AND POUNDS MAXIMUM 40.0 |
| FEAT | SPECIAL FEATURES | DIP AND CENTRIFUGE IN SPECIFIED LUBRICANT |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MFR REF SINGLE MATERIAL RESPONSE RL743,FSC- 19135 |
| MATT | MATERIAL | LUBRICATION OIL |
| MATT | MATERIAL | BALL STEEL COMP 440C |
| MATT | MATERIAL | OUTER RING STEEL COMP 440C |
| MATT | MATERIAL | RETAINER COTTON AND PLASTIC PHENOLIC |
| MATT | MATERIAL | INNER RING STEEL COMP 440C |
| STYL | STYLE DESIGNATOR |