NSN 4720-00-812-8611 · NIIN 008128611 · FSC 4720
NO DASHES 4720008128611
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
41 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 16.875 |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE FUEL/OIL, HYDROCARBON |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| AHNC | CONNECTION STYLE | |
| AHNX | BOLT HOLE DIAMETER | SECOND END INCHES NOMINAL 0.266 |
| AJED | RAISED FACE HEIGHT | SECOND END INCHES MINIMUM 0.010 AND INCHES MAXIMUM 0.020 |
| AJEE | RAISED FACE DIAMETER | SECOND END INCHES NOMINAL 2.125 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 300.0 |
| ABKU | FLANGE THICKNESS | SECOND END INCHES NOMINAL 0.297 |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 2000.0 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| CTCJ | FLANGE STYLE | |
| FEAT | SPECIAL FEATURES | INTERNAL SUPPORT HELICALL WOUND STAINLESS STEEL SPRING AND FOUR CLAMPS FURNISHED TO RETAIN FIRE SLEEVE |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | WEATHERPROOF |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | SECOND END INCHES NOMINAL 1.813 |
| AECS | BOLT HOLE QUANTITY | 4 |
| AFQN | FLANGE LENGTH | SECOND END INCHES NOMINAL 2.375 |
| AGFF | FLANGE WIDTH | SECOND END INCHES NOMINAL 2.375 |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| SUPP | SUPPLEMENTARY FEATURES | THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL. THE CURRENT APPROVED SOURCES 32142 HAVE INDICATED THIER PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984. THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 98441-131033 |
| AWLS | CONNECTION TYPE | SECOND END RAISED FACE FLANGE |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 1300.0 |
| CRFY | FLOW ANGLE | FIRST END DEGREES 30.0 |
| AKUT | END FLANGE CONSTRUCTION | SECOND END SOLID |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 1.625 |
| CQQF | OPERATING PRESSURE | SINGLE RESPONSE POUNDS PER SQUARE INCH (PSI) MAXIMUM 800 |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 1.125 |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNIFIED NATIONAL JOINT (UNJ) |
| AKUU | END CONNECTION DESIGN | FIRST END ELBOW |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 1.410 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 8.000 |
| AAJD | THREAD CLASS | 3B |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | SECOND END INCHES NOMINAL 1.813 |
| AKUU | END CONNECTION DESIGN | SECOND END STRAIGHT |
Supersedes
This item replaces cancelled NIINs 006704334 · 010385806. An older drawing citing one of those numbers resolves here.