NSN 4720-00-195-0257 · NIIN 001950257 · FSC 4720
NO DASHES 4720001950257
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Application: CLARK EQUIPMENT,FORKLIFT,MODEL 22K
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AGAV | END ITEM IDENTIFICATION | CLARK EQUIPMENT,FORKLIFT,MODEL 22K |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAJD | THREAD CLASS | 2B |
| AHNC | CONNECTION STYLE | |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 1600.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.500 |
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 0.125 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 400.0 |
| CQQF | OPERATING PRESSURE | SINGLE RESPONSE POUNDS PER SQUARE INCH (PSI) MAXIMUM 400 |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.250 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 225.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.469 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 2.500 |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE FUEL/OIL, HYDROCARBON |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED FABRIC |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER SHEET RUBBER |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNF |
| THSD | THREAD SERIES DESIGNATOR | SECOND END NPT |
| CQRB | SEAT ANGLE | FIRST END DEGREES 45.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 800.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND WEATHERPROOF |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 13.000 |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| AWLS | CONNECTION TYPE | SECOND END THREADED EXTERNAL PIPE |
| AKUU | END CONNECTION DESIGN | SECOND END STRAIGHT |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |