NSN 3010-01-258-5204 · NIIN 012585204 · FSC 3010
NO DASHES 3010012585204
In Stock
GEARCASE-MOTOR
Torque Converters and Speed Changers
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 2.375 |
| AAJU | OVERALL LENGTH | INCHES 3.531 |
| AAJV | OVERALL WIDTH | INCHES 2.375 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.230 |
| ACDC | CURRENT TYPE | INPUT DC |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | GENERAL PURPOSE |
| AXCP | WINDING TYPE | PERMANENT MAGNET |
| AXGY | MOUNTING METHOD | FACE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | SINGLE END OFFSET ABOVE PARALLEL TO SHAFT AXIS |
| BFMF | COOLING METHOD | OIL |
| BKPH | TORQUE RATING AND TYPE | INCH-OUNCES RUNNING 178.0 |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 1.000 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 2.688 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 1.906 |
| CWGD | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES 1.906 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 12.0 |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | SINGLE END SINGLE REVOLUTIONS PER MINUTE 60.000 AND SINGLE REVOLUTIONS PER MINUTE 75.000 |
| CWHR | ANGLE OF SHAFT TO MOUNTING BASE | SINGLE END DEGREES 90.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A1 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 4 |