NSN 3020-01-060-7163 · NIIN 010607163 · FSC 3020
NO DASHES 3020010607163
In Stock
SPROCKET WHEEL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABFF | FURNISHED ITEMS | BORE BEARING |
| ABHE | OUTSIDE DIAMETER | INCHES NOMINAL 6.230 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.365 AND INCHES MAXIMUM 2.375 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 1.505 AND INCHES MAXIMUM 1.506 |
| ADGE | BORE LENGTH | INCHES MINIMUM 2.365 AND INCHES MAXIMUM 2.375 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 5.617 |
| ALNC | HUB OUTSIDE DIAMETER | BOTH ENDS INCHES NOMINAL 3.750 |
| AQPL | FACE WIDTH | INCHES NOMINAL 0.692 |
| ARJD | DESIGN FORM | PLAIN |
| ASBP | BORE TYPE | STRAIGHT |
| ASYR | DISTANCE FROM HUB END TO FLANGE END | BOTH ENDS INCHES NOMINAL 0.844 |
| BDFC | LUBRICATION MODE | NO VISIBLE MEANS |
| BYDZ | PROTRUDING HUB CHARACTERISTIC | PLAIN |
| BYFL | TEETH ROW QUANTITY | 1 |
| BYFN | TEETH QUANTITY PER ROW | 14 |
| BYFP | ASA STANDARD CHAIN NUMBER | 100 |
| BYFQ | HARDNESS RATING TEST METHOD | NOT RATED |
| BYGF | TOOTH PITCH | INCHES NOMINAL 1.250 |
| MATT | MATERIAL | STEEL COMP 1040 AND STEEL COMP 1045 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD 1ST MATERIAL RESPONSE SAE 1040 AND ASSN STD 2ND MATERIAL RESPONSE SAE 1045 |
| SFTT | SURFACE TREATMENT | OXIDE |
| STYL | STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIIN 008503489. An older drawing citing one of those numbers resolves here.