NSN 6105-00-107-3075 · NIIN 001073075 · FSC 6105
NO DASHES 6105001073075
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 7.880 |
| AAJU | OVERALL LENGTH | INCHES 13.380 |
| AAJV | OVERALL WIDTH | INCHES 9.690 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES NOMINAL 0.190 |
| ABRV | KEYWAY DEPTH | SINGLE END INCHES MINIMUM 0.089 AND INCHES MAXIMUM 0.090 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES MINIMUM 0.749 AND INCHES MAXIMUM 0.750 |
| AFYS | KEYWAY LENGTH | SINGLE END INCHES NOMINAL 3.310 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | OPEN PROTECTED |
| AXCP | WINDING TYPE | SYNCHRONOUS |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | SLOT 4 |
| BFMF | COOLING METHOD | SELF-VENTILATED |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| CNMM | FRAME SIZE DESIGNATION | LL |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 1.5000 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 3.500 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A9 |
| FAAZ | PHASE | INPUT THREE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 3 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 1800.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 5.880 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 208.0 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 5.000 |
| CWDY | TEMP RATING | AMBIENT CELSIUS 70.0 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 4.105 |