NSN 5315-01-120-8489 · NIIN 011208489 · FSC 5315
NO DASHES 5315011208489
In Stock
PIN,GROOVED,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 6.350 AND INCHES MAXIMUM 6.410 |
| ABMZ | DIAMETER | INCHES MINIMUM 4.496 AND INCHES MAXIMUM 4.498 |
| ABNZ | EFFECTIVE LENGTH | INCHES MINIMUM 5.090 AND INCHES MAXIMUM 5.150 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 4.304 AND INCHES MAXIMUM 4.316 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 1.200 AND INCHES MAXIMUM 1.250 |
| ABPD | SECOND UNDERCUT WIDTH | INCHES MINIMUM 1.200 AND INCHES MAXIMUM 1.250 |
| AKTX | FIRST END COUNTERBORE DIAMETER | INCHES MINIMUM 0.970 AND INCHES MAXIMUM 1.030 |
| AKTY | SECOND END COUNTERBORE DIAMETER | INCHES MINIMUM 0.970 AND INCHES MAXIMUM 1.030 |
| AKTZ | FIRST END COUNTERBORE DEPTH | INCHES MINIMUM 0.720 AND INCHES MAXIMUM 0.780 |
| AKVA | SECOND END COUNTERBORE DEPTH | INCHES MINIMUM 0.720 AND INCHES MAXIMUM 0.780 |
| AMCS | FIRST END TAPER LENGTH | INCHES MINIMUM 0.470 AND INCHES MAXIMUM 0.530 |
| AMFM | SECOND END TAPER LENGTH | INCHES MINIMUM 0.470 AND INCHES MAXIMUM 0.530 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 45.0 AND ROCKWELL C MAXIMUM 50.0 |
| CQSX | SHEAR STRENGTH | SINGLE POUNDS PER SQUARE INCH 140000 |
| CRDY | FIRST END LOCATION | BOTH ENDS |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CTHC | SECOND END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 4340 |
| STYL | STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIIN 000508736. An older drawing citing one of those numbers resolves here.