NSN 6105-00-903-2014 · NIIN 009032014 · FSC 6105
NO DASHES 6105009032014
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 12.500 |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 24.720 |
| BYDT | BEARING TYPE | ANNULAR BALL |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SECOND END INCHES 8.000 |
| AAJT | OVERALL HEIGHT | INCHES 20.062 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | FIRST END INCHES 7.938 |
| BFMF | COOLING METHOD | NATURAL CONVECTION VENTILATED |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 440.0 |
| FAAZ | PHASE | INPUT THREE |
| CWDY | TEMP RATING | OPERATING CELSIUS 50.0 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE NO LOAD 3600.0 AND SINGLE FULL LOAD 3515.0 |
| AAJU | OVERALL LENGTH | INCHES 37.562 |
| AAJV | OVERALL WIDTH | INCHES 15.875 |
| AKCT | SHAFT ROTATION DIRECTION | FIRST END CLOCKWISE |
| AKCT | SHAFT ROTATION DIRECTION | SECOND END COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | DRIPPROOF PROTECTED-45 DEG |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL---17060 |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | MIL-STD-108 |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 20.0000 |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 12.000 |