NSN 3416-01-030-8195 · NIIN 010308195 · FSC 3416
NO DASHES 3416010308195
In Stock
LATHE,ENGINE
Lathes
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAXX | MOUNTING TYPE | FLOOR |
| ACDC | CURRENT TYPE | AC |
| ADQR | CENTER TO CENTER DISTANCE | INCHES MINIMUM 30.000 |
| AGLD | PERFORMANCE TYPE | STANDARD DUTY |
| AKSL | PURPOSE FOR WHICH DESIGNED | GENERAL |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | 2 NO.3 MORSE TAPER LATHE CENTERS,3 CHUCKS,1 FLEXIBLE RUBBER COLLET SET,5 BENT TAIL DOG LATHES,1 DOG LATHE,1 DRIVE PLATE,1 FACEPLATE,1 METRIC TRANSPOSING GEAR LATHE,1 BORING BAR CUTTING TOOL HOLDER,3 CUTTING-OFF CUTTING TOOL HOLDERS,3 TURNING CUTTING TOOL HOLDERS,1 V-FORM THREADING TOOL HOLDER,1 KNURLING TOOLS,4 COLLET PLUGS,2 LATHE RESTS,1 LATHE CENTER SLEEVE,1 MICROMETER LATHE CARRIAGE STOP,1 TELESCOPIC LATHE TAPEP ATTACHMENT |
| APGF | DESIGN TYPE | SCREW |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 1.500 |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| BTSZ | SPINDLE SPEED QUANTITY | 12 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 53.0 TO 1800.0 |
| BTTD | RATED SWING | INCHES NOMINAL 13.000 |
| BTTF | ACTUAL SWING OVER BED | INCHES NOMINAL 13.000 |
| BTTG | SWING OVER CROSS SLIDE | INCHES NOMINAL 7.750 |
| BTWB | THREAD CHANGE QUANTITY | 48 |
| BTWL | HEADSTOCK DRIVE TYPE | STEP CONE PULLEY, BACK GEARED |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | INCHES NOMINAL 1.375 |
| BTYQ | CARRIAGE QUANTITY | 1 |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| BTYT | CARRIAGE FEED CHANGE QUANTITY | 48 |
| BTZR | THREAD QUANTITY RANGE | PER INCH 4.0 TO 80.0 |
| ELEC | VOLTAGE IN VOLTS | 115.0 AND 230.0 |
| FAAZ | PHASE | SINGLE |
| FEAT | SPECIAL FEATURES | 1400 LBS.MAX NET WT OF LATHE; FLOOR CABINET DESIGNED FOR STOWAGE OF ALL ACCESSORIES |
| FREQ | FREQUENCY IN HERTZ | 60.0 |