NSN 3110-01-341-0747 · NIIN 013410747 · FSC 3110
NO DASHES 3110013410747
In Stock
BEARING,BALL,DUPLEX
Bearings, Antifriction, Unmounted
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.4900 AND INCHES MAXIMUM 0.5000 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 3.2497 AND INCHES MAXIMUM 3.2500 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 3.7497 AND INCHES MAXIMUM 3.7500 |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGZC | LOAD DIRECTION | ANGULAR |
| AGZJ | BEARING PRELOAD DESIGNATION | LIGHT |
| CTHQ | BEARING PRELOAD RATING | POUNDS MINIMUM 10.0 AND POUNDS MAXIMUM 20.0 |
| CTHY | CONTACT ANGLE | DEGREES MINIMUM 27.0 AND DEGREES MAXIMUM 33.0 |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MFR REF SINGLE MATERIAL RESPONSE -L-79 OIL,CAGEC 98354 |
| MATT | MATERIAL | LUBRICATION OIL |
| MATT | MATERIAL | OUTER RING STEEL COMP E52100 |
| MATT | MATERIAL | BALL STEEL COMP E52100 |
| MATT | MATERIAL | RETAINER COTTON AND PLASTIC PHENOLIC |
| MATT | MATERIAL | INNER RING STEEL COMP E52100 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | RETAINER MIL SPEC SINGLE MATERIAL RESPONSE -IL--79,TYE FBE |
| STYL | STYLE DESIGNATOR |