NSN 3020-00-528-1160 · NIIN 005281160 · FSC 3020
NO DASHES 3020005281160
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 32 |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 2.9980 AND INCHES MAXIMUM 3.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.250 |
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | TRANSVERSELY THROUGH HUB FIRST END UNIFIED NATIONAL COARSE (UNC) |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.050 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.188 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 3.041 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.422 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| SFTT | SURFACE TREATMENT | OVERALL NICKEL |
| AJLA | TEETH QUANTITY | 144 |
| CWTB | COUNTERBORE NOMINAL DEPTH | SECOND END INCHES 0.078 |
| CWTG | COUNTERBORE NOMINAL DIAMETER | SECOND END INCHES 0.470 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 0.498 |
| MATT | MATERIAL | OVERALL COPPER ALLOY |
| STYL | STYLE DESIGNATOR | |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END THREADED 2 |
| ANTP | BORE STYLE | |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.138 |
Supersedes
This item replaces cancelled NIIN 000906788. An older drawing citing one of those numbers resolves here.