NSN 4720-00-836-7423 · NIIN 008367423 · FSC 4720
NO DASHES 4720008367423
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKUU | END CONNECTION DESIGN | SECOND END STRAIGHT |
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 0.562 |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| ADJS | EXTERIOR COLOR | BLACK |
| AHNC | CONNECTION STYLE | |
| THSD | THREAD SERIES DESIGNATOR | SECOND END UNF |
| ZZZK | SPECIFICATION/STANDARD DATA | NATIONAL STD/SPEC SAE J517,100R1,TYE AT,SIZE 4-81343 |
| AAJD | THREAD CLASS | 3B |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNF |
| AKXL | END FITTING COMPONENT AND MATERIAL | FIRST END COMPLETE FITTING STEEL CORROSION RESISTING |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 4.000 |
| CQRB | SEAT ANGLE | SECOND END DEGREES 37.0 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 5500.0 |
| CBBL | FEATURES PROVIDED | NONSKIVE AND REUSABLE END FITTINGS |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 11000.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.438 |
| AKXL | END FITTING COMPONENT AND MATERIAL | SECOND END COMPLETE FITTING STEEL |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 49.500 |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| AWLS | CONNECTION TYPE | SECOND END THREADED INTERNAL TUBE |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.250 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 200.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.530 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 2750.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE HYDRAULIC FLUID, WATER BASE |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED STEEL WIRE |