NSN 5310-00-778-9512 · NIIN 007789512 · FSC 5310
NO DASHES 5310007789512
In Stock
NUT,SELF-LOCKING,PLATE
Nuts and Washers
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| ACVN | NUT LENGTH | INCHES MAXIMUM 1.051 |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | INCHES MINIMUM 0.310 AND INCHES MAXIMUM 0.314 |
| AZKQ | TEMP RATING | FAHRENHEIT NOMINAL 450.0 |
| ADFU | MOUNTING HOLE ARRANGEMENT STYLE | |
| ABAJ | LUBRICATION | DRY FILM LUBRICANT |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.098 AND INCHES MAXIMUM 0.103 |
| ACTA | NUT STYLE | |
| CQFM | HARDNESS RATING | ROCKWELL C MAXIMUM 49.0 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.138 |
| ADEA | NUT HEIGHT | INCHES MAXIMUM 0.203 |
| ADEB | PLATE THICKNESS | INCHES MAXIMUM 0.032 |
| ADEC | PLATE WIDTH | INCHES MINIMUM 0.290 AND INCHES MAXIMUM 0.422 |
| ADFP | NUT MOUNTING PROVISION | COUNTERSUNK HOLES |
| ADFR | MOUNTING PROVISION LOCATION | OPPOSITE NUT PROJECTION SIDE |
| ADFW | DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | INCHES MINIMUM 0.339 AND INCHES MAXIMUM 0.349 |
| AAUM | LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| BZRR | THREAD SERIES | UNJC |
| CBBL | FEATURES PROVIDED | FLOATING NUT |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CSSM | MOUNTING HOLE COUNTERSINK ANGLE | DEGREES MINIMUM 98.0 AND DEGREES MAXIMUM 102.0 |
| MATT | MATERIAL | OVERALL STEEL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 |
Supersedes
This item replaces cancelled NIIN 002084181. An older drawing citing one of those numbers resolves here.