NSN 5990-00-501-2017 · NIIN 005012017 · FSC 5990
NO DASHES 5990005012017
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJVM | SPLINE TOOTH QUANTITY | 22 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 420.0 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.783 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 1.2500 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.250 |
| AJSL | BODY SIZE | 18 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 6.5 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.6760 |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 115.0 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 1.6250 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.9375 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 4.4300 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 1.7500 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0780 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0930 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.2401 AND INCHES MAXIMUM 0.2405 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 5 |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES MINIMUM 0.1250 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 60.0 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 3.9300 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | INCH-OUNCES NOMINAL 0.330 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AKAN | SHAFT THREAD CLASS | 2A |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 31TX6 |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.2670 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 96 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |