NSN 5990-00-881-1031 · NIIN 008811031 · FSC 5990
NO DASHES 5990008811031
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 44.0 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-S-20708 TO 79 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0200 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | MINIMUM 16.00 AND MAXIMUM 20.00 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 444.00 AND MAXIMUM 570.00 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 2.203 |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0250 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-20708 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 8.000 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 25.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | MINIMUM 76.00 AND MAXIMUM 81.00 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| AJSL | BODY SIZE | 8 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 11.8 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 23.0 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2400 |
| AAQL | BODY STYLE | |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.5920 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.7450 AND INCHES MAXIMUM 0.7500 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.6870 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0898 AND INCHES MAXIMUM 0.0900 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3520 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 10.0 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | INCH-OUNCES MAXIMUM 0.040 |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 830.00 AND MAXIMUM 940.00 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
Supersedes
This item replaces cancelled NIINs 000315183 · 010474818 · 010877605 · 013105360. An older drawing citing one of those numbers resolves here.