ATLASAir Supply

321-252-9430Mon–Fri · 8a–6p ET
Quote0 Request a Quote →
Home / MS parts / Bearings & Mechanical / NSN 3120-01-173-3728
NSN 3120-01-173-3728  ·  NIIN 011733728  ·  FSC 3120
NO DASHES 3120011733728
In Stock

BEARING,SLEEVE

Bearings, Plain, Unmounted

Technical characteristics

25 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

MRCRequirementValue
AAUBHOLE DIAMETERFIRST MILLIMETERS MINIMUM 4.6 AND MILLIMETERS MAXIMUM 5.1
ABHPOVERALL LENGTHMILLIMETERS MINIMUM 28.625 AND MILLIMETERS MAXIMUM 28.705
ADARBODY OUTSIDE DIAMETERMILLIMETERS MINIMUM 79.88 AND MILLIMETERS MAXIMUM 80.38
ADASBODY INSIDE DIAMETERMILLIMETERS NOMINAL 76.29
AGFQLEFT FLANGE OUTSIDE DIAMETERMILLIMETERS MINIMUM 98.72 AND MILLIMETERS MAXIMUM 101.00
AGFRRIGHT FLANGE OUTSIDE DIAMETERMILLIMETERS MINIMUM 98.72 AND MILLIMETERS MAXIMUM 101.00
AGFSLEFT FLANGE WIDTHMILLIMETERS NOMINAL 2.33
AGFTRIGHT FLANGE WIDTHMILLIMETERS NOMINAL 2.33
BZLXCORNER SHAPERIGHT FLANGE OUTSIDE LEFT CORNER CHAMFERED
BZLXCORNER SHAPEINSIDE RIGHT CORNER ROUND
BZLXCORNER SHAPELEFT FLANGE OUTSIDE RIGHT CORNER CHAMFERED
BZLXCORNER SHAPEOUTSIDE RIGHT CORNER CHAMFERED
BZLXCORNER SHAPEINSIDE LEFT CORNER ROUND
BZLXCORNER SHAPEOUTSIDE LEFT CORNER CHAMFERED
BZLXCORNER SHAPELEFT FLANGE BODY CORNER ROUND
BZLXCORNER SHAPERIGHT FLANGE BODY CORNER ROUND
CTJMANTIROTATION/LUBRICATION TYPE AND QUANTITYHOLE 1
CTMQSURFACE GROOVE LOCATION AND QUANTITYINTERNAL 1
FEATSPECIAL FEATURESTIN SURFACE TREATMENT NOT REQUIRED ON I.D.; INTERNAL SURFACE GROOVE AND OIL HOLE ON ONE HALF ONLY; ONE LOCKING LUG ON OUTSIDE SURFACE OF BODY EACH HALF,1.275 MM NOM HIGH,3.24 MM WIDE,13.36 MM NOM FROM INSIDE OF FLANGE ON HALF W/O GROOVE AND HOLE,12.0 MM NOM ON HALF W/GROOVE AND OIL HOLE
MATTMATERIALINTERMEDIATE LAYER STEEL COMP 1008 OR STEEL COMP 1010
MATTMATERIALOUTER LAYER LEAD ALLOY
MATTMATERIALINNER LAYER ALUMINUM OR COPPER ALLOY
PRPYPROPRIETARY CHARACTERISTICSPACS
SFTTSURFACE TREATMENTOVERALL TIN
STYLSTYLE DESIGNATOR