NSN 5990-00-902-2663 · NIIN 009022663 · FSC 5990
NO DASHES 5990009022663
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
38 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.2000 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 2.0000 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.7495 AND INCHES MAXIMUM 0.7500 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 3.2000 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 2.1600 AND INCHES MAXIMUM 2.1610 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 49.50 |
| CQTM | TERMINAL LOCATION | REAR |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.1250 |
| AJSL | BODY SIZE | 22 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0950 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 3.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 0.60 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 1.30 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 2.0050 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 2.6400 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 75.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 125.00 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | AMPERES MAXIMUM 1.1 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS MAXIMUM 4.4 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 29.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 4.80 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 1.70 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 0.50 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 0.21 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 1.000 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1845 AND INCHES MAXIMUM 0.1850 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5600 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 18.00 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0600 |
| CSJY | TRANSFORMATION RATIO | STATOR TO ROTOR NOMINAL 0.454 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND |