NSN 3020-00-906-9888 · NIIN 009069888 · FSC 3020
NO DASHES 3020009069888
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | HUB MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7720,COND A |
| CWNH | TOOTH FORM | STANDARD |
| STYL | STYLE DESIGNATOR | |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | HUB MIL SPEC SINGLE TREATMENT RESPONSE -IL-STD-171,FINISH NO. 5.4.1 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.061 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.370 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BODY FED SPEC SINGLE MATERIAL RESPONSE L--392 TYE 1,CLASS 1 |
| MATT | MATERIAL | BODY PLASTIC ACETAL |
| MATT | MATERIAL | HUB STEEL COMP 302 OR STEEL COMP 303 |
| AJLA | TEETH QUANTITY | 41 |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.597 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.259 |
| CWWS | FIRST STEP NOMINAL LENGTH | SECOND END INCHES 0.063 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 0.250 |
| CWPZ | HELIX ANGLE | DEGREES 3.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.629 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.063 |
| CWWN | END NOMINAL DIAMETER | SECOND END INCHES 0.125 |
| CWWH | END NOMINAL LENGTH | SECOND END INCHES 0.167 |
| SFTT | SURFACE TREATMENT | HUB PASSIVATE |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.5702 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.125 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWNM | TOOTH DIRECTION | RIGHT |