NSN 9330-00-138-5858 · NIIN 001385858 · FSC 9330
NO DASHES 9330001385858
In Stock
WINDOW,OBSERVATION
Plastics Fabricated Materials
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAFW | PLY QUANTITY | 1 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 3.719 AND INCHES MAXIMUM 3.750 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 1.719 AND INCHES MAXIMUM 1.750 |
| ADUM | OVERALL THICKNESS | INCHES NOMINAL 0.125 |
| ADZC | ENVIRONMENTAL PROTECTION | HIGH TEMPERATURE RESISTANT AND WEATHER RESISTANT |
| AGYE | SURFACE FINISH | FINE FINISHED |
| AJHV | FIRST CORNER RADIUS | INCHES MINIMUM 0.047 AND INCHES MAXIMUM 0.063 |
| AJHW | SECOND CORNER RADIUS | INCHES MINIMUM 0.047 AND INCHES MAXIMUM 0.063 |
| AJHX | THIRD CORNER RADIUS | INCHES MINIMUM 0.047 AND INCHES MAXIMUM 0.063 |
| AJQE | MATERIAL TRANSPARENCY | CLEAR |
| AKVK | FOURTH CORNER RADIUS | INCHES MINIMUM 0.047 AND INCHES MAXIMUM 0.063 |
| AQQR | EDGE TYPE | FLAT FINISH |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 8000 |
| FEAT | SPECIAL FEATURES | FOUR 0.140 IN. DIA MTG HOLES SPACED ON 1.375 IN. BY 3.375 IN. MTG CENTERS |
| MATT | MATERIAL | PLASTIC |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL--5425 |
| STYL | STYLE DESIGNATOR |