NSN 2815-00-354-4341 · NIIN 003544341 · FSC 2815
NO DASHES 2815003544341
In Stock
CYLINDER SLEEVE
Diesel Engines and Components
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AYSM | BOTTOM CHAMFER LENGTH | INCHES NOMINAL 0.031 |
| AAZP | CHAMFER LENGTH | INCHES NOMINAL 0.094 |
| ABFF | FURNISHED ITEMS | TOP INSIDE CHAMFER AND BOTTOM INSIDE CHAMFER |
| ABGF | GROOVE WIDTH | INCHES MINIMUM 0.275 AND INCHES MAXIMUM 0.281 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 12.500 |
| ADAR | BODY OUTSIDE DIAMETER | INCHES NOMINAL 5.812 |
| BPQB | GROOVED PORTION OUTSIDE DIAMETER | INCHES MINIMUM 5.871 AND INCHES MAXIMUM 5.872 |
| BPQC | GROOVED PORTION WIDTH | INCHES MINIMUM 0.712 AND INCHES MAXIMUM 0.718 |
| BPPY | LARGEST OUTSIDE DIAMETER UNDER FLANGE | INCHES MINIMUM 5.871 AND INCHES MAXIMUM 5.872 |
| ABQA | TAPER MINOR DIAMETER | INCHES MINIMUM 5.768 AND INCHES MAXIMUM 5.769 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 5.250 AND INCHES MAXIMUM 5.251 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 9.312 |
| MATT | MATERIAL | IRON CAST |
| ZZZV | FSC APPLICATION DATA | CRANKCASE GROUP,DIESEL ENGINE |
| AETC | METALLIC HARDNESS RATING | NOMINAL BRINELL STANDARD 180.0 AND NOMINAL BRINELL STANDARD 220.0 |
| AHTC | FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 6.179 AND INCHES MAXIMUM 6.181 |
| APGF | DESIGN TYPE | WET |
| AYSK | BOTTOM CHAMFER ANGLE IN DEG | 45.0 |
| AATE | CHAMFER ANGLE IN DEG | 15.0 |
| BPPZ | LARGEST OUTSIDE DIAMETER WIDTH UNDER FLANGE | INCHES NOMINAL 2.219 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.378 AND INCHES MAXIMUM 0.379 |
| ABND | TAPER LENGTH | INCHES NOMINAL 0.594 |
| BQBD | GROOVE RADIUS DEPTH | INCHES MINIMUM 0.096 AND INCHES MAXIMUM 0.101 |
Supersedes
This item replaces cancelled NIIN 004294183. An older drawing citing one of those numbers resolves here.