NSN 4320-01-628-2183 · NIIN 016282183 · FSC 4320
NO DASHES 4320016282183
In Stock
ROTOR AND SHAFT PUMP ASSEMBLY
Power and Hand Pumps
Application: DESIGNED FOR TURBO SHAFT ENGINE TEST SYSTEM
Technical characteristics
3 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| FEAT | SPECIAL FEATURES | OPERATING PRESSURE IS 100 PSI;DILIVERY FLOW RATE @1140 RPM=4.2GPM PER PUMP ASSEMBLY HAS 2 PUMPS; MAX CONTINUOUS PRESSURE IS 2500 PSI; MOTOR SHALL BE 3/4 HP, 220 VOLT, 3 PHASE, 1200 RPM, NEMA 143 TC, TEFC;SUITABLE FOR OUTDOOR USE IN AN AMBIENT TEMPERATURE RANGE OF MINUS 40 DECREES F TO PLUS 140 DEGREES F;APPLY ONE COAT OF PRIMER PER MIL-DTL-0053022, TYPE II. THEN APPLY ONE COAT TOP COAT PER MIL-PRF-85285, TYPE II USE COLOR NUMBER 17925 (WHITE) |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | ROTOR AND SHAFT PUMP ASSEMBLY |
| AGAV | END ITEM IDENTIFICATION | DESIGNED FOR TURBO SHAFT ENGINE TEST SYSTEM |