NSN 5990-00-137-2915 · NIIN 001372915 · FSC 5990
NO DASHES 5990001372915
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 1.0620 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.4650 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 20.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 75.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT MAXIMUM 6.000 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 400.00 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 5 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 45.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS MINIMUM 75.0 AND MILLIWATTS MAXIMUM 100.0 |
| AJTM | ZRS IMPEDANCE ANGLE IN DEG | NOMINAL 30.00 |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 3340.00 |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | NOMINAL 80.00 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 580.00 |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | NOMINAL 80.00 |
| AJTL | ZRS IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 660.00 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.8350 |
| CQTM | TERMINAL LOCATION | REAR |
| CRSJ | SHAFT TYPE | FRONT SHAFT ROUND |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 2.203 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 25.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 16.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 4.0 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AAQL | BODY STYLE | |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | FRONT SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| ABXF | SHAFT LENGTH | FRONT SHAFT INCHES NOMINAL 0.5060 |
| AJSL | BODY SIZE | 11 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 11.8 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0500 |