NSN 5990-00-606-1475 · NIIN 006061475 · FSC 5990
NO DASHES 5990006061475
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0570 AND INCHES MAXIMUM 1.0650 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 135.0 |
| AAQL | BODY STYLE | |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 0.003 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 7 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 1224.00 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 22.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 12 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 3.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS MAXIMUM 0.41 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.190 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.7890 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 47.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 565.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 28.000 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.7080 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQTM | TERMINAL LOCATION | REAR |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 50.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 570.00 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 67.00 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0500 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.0620 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5550 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 0.25 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 87.00 |
| AJVM | SPLINE TOOTH QUANTITY | 21 |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.2530 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
Supersedes
This item replaces cancelled NIIN 007227919. An older drawing citing one of those numbers resolves here.