NSN 3130-01-282-3468 · NIIN 012823468 · FSC 3130
NO DASHES 3130012823468
In Stock
BEARING UNIT,BALL
Bearings, Mounted
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.844 |
| ABTD | MOUNTING SLOT WIDTH | INCHES NOMINAL 0.8438 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 0.5000 |
| ACYB | BASE THICKNESS | INCHES NOMINAL 0.6250 |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES MINIMUM 3.2500 AND INCHES MAXIMUM 4.0625 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 2.1562 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 5.0625 |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGNF | BASE LENGTH | INCHES NOMINAL 1.0625 |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | INCHES NOMINAL 0.9844 |
| AKRF | SEAL TYPE | CONTACT |
| AMCL | BLOCK TYPE | FIXED |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKH | COLLAR LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES NOMINAL 1.0625 |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 45.0 |
| CWGY | ROTATING ELEMENT LOCKING METHOD | SETSCREW LOCKING COLLAR |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| MATT | MATERIAL | HOUSING IRON CAST |
| MATT | MATERIAL | SEAL PLASTIC POLYAMIDE NYLON |
| STYL | STYLE DESIGNATOR |