NSN 5990-00-928-5655 · NIIN 009285655 · FSC 5990
NO DASHES 5990009285655
In Stock
SYNCHRO,RECEIVER
Synchros and Resolvers
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJSL | BODY SIZE | 11 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 243.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 40.50 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0500 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.6200 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9750 |
| CWAC | SHAFT TAPER LENGTH | FRONT SHAFT INCHES MINIMUM 0.1310 AND INCHES MAXIMUM 0.1510 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| ABWV | SHAFT DIAMETER | FRONT SHAFT INCHES NOMINAL 0.1190 |
| ABXF | SHAFT LENGTH | FRONT SHAFT INCHES NOMINAL 0.1940 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.7760 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0590 AND INCHES MAXIMUM 1.0620 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0900 AND INCHES MAXIMUM 0.0960 |
| CRJX | SHAFT TAPERED END MINOR DIAMETER | FRONT SHAFT INCHES NOMINAL 0.1150 |
| ALNF | SHAFT HOLE DIAMETER | FRONT SHAFT INCHES NOMINAL 0.0200 |
| CQTM | TERMINAL LOCATION | REAR |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 120.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 5 |
| AJTT | STATOR DC RESISTANCE IN OHMS | MINIMUM 8.37 AND MAXIMUM 10.23 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR MINIMUM 0.440 AND ROTOR TO STATOR MAXIMUM 0.468 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 4.300 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 28.00 |
| CRSJ | SHAFT TYPE | FRONT SHAFT ROUND, TAPERED, HOLLOWED |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 44.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 11.70 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 57.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | MINIMUM 16.20 AND MAXIMUM 19.80 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 600.0 |
| CSLT | SHAFT TAPER ANGLE IN DEG | 3.0 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |