NSN 5970-00-481-7210 · NIIN 004817210 · FSC 5970
NO DASHES 5970004817210
In Stock
INSULATION SLEEVING,ELECTRICAL,S
Electrical Insulators and Insulating Materials
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGAP | ANGLE BETWEEN LARGE END AND SMALL END CENTERLINES IN DEG | AFTER UNRESTRICTED RECOVERY NOMINAL 90.0 |
| AGAK | MAIN BODY LARGE END INSIDE DIAMETER | AFTER UNRESTRICTED RECOVERY INCHES MAXIMUM 0.310 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJH | TEMP RATING | CELSIUS -55.0 |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FLAME RESISTANT AND MILDEW RESISTANT AND SOLVENT RESISTANT AND WATER RESISTANT |
| HGTH | HEIGHT | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 0.790 |
| HUES | COLOR | BLACK |
| AFZQ | SMALL END WALL THICKNESS OF MAIN BODY | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 0.040 |
| AFZR | DISTANCE FROM INTERSECTING CENTERLINES TO EDGE OF SMALL END | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 0.680 |
| AFZP | LARGE END WALL THICKNESS OF MAIN BODY | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 0.040 |
| AGAM | DISTANCE FROM TOP OF SHOULDER TO SMALL END OF MAIN BODY | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 0.190 |
| AGAJ | MAIN BODY SMALL END INSIDE DIAMETER | AS SUPPLIED INCHES MINIMUM 0.650 |
| AGAK | MAIN BODY LARGE END INSIDE DIAMETER | AS SUPPLIED INCHES MINIMUM 0.650 |
| AGAJ | MAIN BODY SMALL END INSIDE DIAMETER | AFTER UNRESTRICTED RECOVERY INCHES MAXIMUM 0.150 |
| STYL | STYLE DESIGNATOR | |
| AGAP | ANGLE BETWEEN LARGE END AND SMALL END CENTERLINES IN DEG | AS SUPPLIED NOMINAL 180.0 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 1500 |
| FLEX | FLEXIBILITY | SEMIRIGID |
| MATT | MATERIAL | LOCATION NOT OTHERWISE SPECIFIED PLASTIC POLYOLEFIN |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | LOCATION NOT OTHERWISE SPECIFIED MFR REF SINGLE MATERIAL RESPONSE RT-301, RAYCHE- COR |
| AFZS | DISTANCE FROM CENTERLINE OF SMALL END TO EDGE OF LARGE END | AFTER UNRESTRICTED RECOVERY INCHES NOMINAL 0.610 |
| UKBG | DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS | VOLTS PER MIL /0.001 INCH/ 200.0 |
Supersedes
This item replaces cancelled NIIN 009047543. An older drawing citing one of those numbers resolves here.